Tag Archives: lexia 3

Choosing the right interface psa

Posted on by

Hello guys … Well I bring you a reliable answer … and probably one of the cheapest I could find so far

Low cost my version (Not fullchip never worked properly …) The 42 € on the site I give you later …

I therefore recommended urgent Fullchip Version to unlock a 206 that had lost its telecoding …

After reception and instalation from the CD provided by ting tong (Version scary01)

This one works 100% without any beug on my EeePC …

-> Allow 10 days of waiting before reception …

-> I would note though this interface 4/5 because it lacked the plug spring (do nothing prevents a static diag … but more hassle for LOG wheelchair …)

-> Super simple instalation scary under 01 (instalation V7.02 -> Can update “rather long” grace has MAJ V7.XX a 7.49 on the CD … and I’m Stops)

Lexia 3 V48 PP2000 V25 XS Evolution Peugeot 307 Support Free Shipping By Post

http://www.diyobd2.fr/wholesale/lexia-3-xs-evolution-pp2000-support-peugeot-307-livraison-gratuite-par-la-poste.html

Question:

the VCI is there the icon of the brand Peugeot Citroen? because the site is not voi

reply:

Yes Yes

Here a picture taken of aillor + interface

I have both a full and one not, I have not had any problems on the C5 and 307 I tested with the “not full” I even reprogrammed valves on a C5 II.

secure transaction via paypal …

And number of suivi.complet the departure of the package at the end avev delivery against signature …

Lexia 3 Lexia-3 (xs evolution supporté) V48 PP2000 V25 avec Diagbox V7.76 Série 921815C / Firmware Support Peugeot 307:

Ceci est Lexia 3 PP2000 diagnostic du support technique du site Web www.diyobd2.fr:Choisir la bonne psa d’interface

How to install Lexia 3 DiagBox 7.76 on Windows XP

Posted on by
This is the instruction on how to install Citroen & Peugeot diagnostic system DiagBox 7.76 for Lexia 3.
Lexia 3 compatible software info:
Lexia 3 can work with PP2000 and DiagBox for Citroen & Peugeot vehicles.
PP2000 usually is better for old cars;
DiagBox is better for new cars.
Download DiagBox 7.76 and PP2000:
Hardware and Software Requirements：
Intel Celeron/Pentium III 400 MHz,
128 MB RAM,
50MB free HDD space
USB 1.1 port (USB 2.0 recommended)
Microsoft Windows 98 SR2/2000/XP with the latest service pack installed; Windows?XP?system better.
Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.
How to install Diagbox V7.76 for Lexia 3：

Step 1 – Install DAEMON Tools Lite
Step 2 – Install Diagbox
Step 3 – Activate Diagbox
Step 4 – Update Diagbox to v7.57
Step 5 – Update Diagbox to v7.58
Step 6 – Update Diagbox to v7.62
Step 7 – Update Diagbox to v7.66
Step 8 – Update Diagbox to v7.74
Step 9 – Update Diagbox to v7.76
Step 10 – Run Diagbox 7.76 to diagnose Citroen XM
Attached files:

Ceci est du support technique du site Web DIYobd2.fr:How to install Lexia 3 DiagBox 7.76 on Windows XP

LEXIA 3 PP2000 Works well on Citroen C5

Posted on by

Today, we obd2 would offer a reputable auto scanner, Lexia 3 pp2000, working well on Citroen C5.

LEXIA-3 PP2000 Hardware and software requirements:
1. Computer system:XP system

Software requires at least Intel Celeron/Pentium III 400 MHz,128 MB RAM,50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

2.Computer cannot install anti-virus software.

3. PP2000 cannot install with DIAGBOX in same computer.

How to connect Lexia 3 PP2000 to Citroen:

1.Look under the Citroen driver-side dashboard for the diagnostic trouble code (DTC) connection port. It is black, rectangular-shaped and roughly one inch wide by a 1/4-inch tall. It should have a small cap on it to prevent dirt from entering the connector. Quite often the cap will have the letters “DTC” embossed on it.

2. Remove the cover from the connection port and move the cover off to the side. Lexia 3PP2000 should be attached to the port by a thin strand of plastic to prevent the cap from being lost.Plug in your Lexia 3PP2000’s OBD-ii cableto the connection port.

3. Turn on your Lexia 3 PP2000 diagnostic tool,Write the codes down from the Lexia 3 PP2000 Peugeot Citroen Diagnostic tool, once you have them, as you will need to refer to them during the troubleshooting process that is easy to contact and use it.

Ps. This connection diagram is not based on C5; but the connection way is the same as that.

LEXIA 3 PP2000 Works well on Citroen C5:

Inside PCB board display:

921815C chip is of high quality, the same as original chip.

LEXIA-3 PP2000 also for the following Peugeot Citroen:

Ceci est du support technique du site Web OBD2 Outil de diagnostic:LEXIA 3 PP2000 Works well on Citroen C5

Reflash your PSA lexia3 cable to work with Diagbox 7.76

Posted on by

If you have lexia 3 cable clone with Lexia/PP2000/Diagbox software is not compatible with diagbox version greater than 7.02.

You probably know that we must re-flash the MCU internal EEPROM and the SPI that contains no problematic series. Here is the DIY tutorial on how to reflash your lexia3.

So far the only solution was to make a programming interface to reflash the MCU and desoldering SPI EEPROM to be able to reprogram on an EEPROM programmer.
You could do it yourself, but it is not accessible to everyone, and send it to someone who updates your interface to cost money.

As electronics and have already developed on the MCU used in this interface (MB90F546), I developed a special program which is injected into the interface through USB with PSA Interface Checker and allows the upgrade for it to be recognized usb com Evolution board and also change the serial number for a No. non blacklisted series. The interface then becomes compatible with the latest versions of diagbox 8)

If you are confronted with the version on your Lexia 3 diagbox v7.76 clamping interface and want the ‘upgrade, the procedure is as follows:

– You made me demand by private message, giving me your full personal details: name, address, and ideally the email address provided by your ISP.

This personal information I care little, but I need to put them in the file that I send you by email. The customization file with your personal information is used only to deter move the file to someone else, to avoid the spread of wild file on the Internet and prevent profiteers steal my work.

1) Once I have received your application and personal information, I prepare your custom upgrade file and I send it to you by email with the explanations to make updating your interface.

2) Upon receiving my file ‘upgrade in a few mouse clicks, your interface will be updated and compatible with diagbox 7.xx!

 

You probably read right or left this method update by USB is not good. It’s hype. Once the interface update by yourself with my method, it contains exactly the same firmware (4.3.0 + bootloader Board Com Evolution) by making hardware update (disassembly, reprogramming MCU, desoldering / reprogramming / ressoudage EEPROM). Regarding the serial number, I provided you a No random series that is different for everyone.

This is much better than no single series for everyone, even if existing, for if one day the manufacturer decides to blacklist the serial number, then all these interfaces are found inconsistent with the future versions diagbox !!

And at worst, if one day the serial number that I provided you can no longer work correctly with future versions of diagbox, and although it will be enough to remake me a request and I will provide a new update file to change by the usb serial number in eeprom, always without removing the interface

Ceci est du support technique du site Web DIYobd2.fr:Reflasher votre câble lexia3 de PSA à travailler avec DiagBox 7.xx

What functions can Lexia 3 V48 program for Citroen C4 and C5?

Posted on by
Here is a list including Citroen C4 and C5 functions that can be programmed via Lexia 3 V48 diagnostic tool so you can see what it might be possible to add / is missing from your car. This list is applicable to C4 and C5 because they share the same computer. The reliable Leixa 3 scanner is available in this shop: http://www.diyobd2.fr/wholesale/lexia-3-pp2000-citroen-peugeot-diagnostic-interface.html
Customer Options
On-the-move locking option
Detection of driver’s seat belt not fastened
Presence of front foglamps
Multiplexed electric rear view mirrors with foldback
Presence of rear screen wipe in reverse gear
Automatic relocking
Type of alarm
Presence of a trailer relay unit (BSR)
Type of deflation detection
Type of daytime-running lamps
Menu: vehicle definition – equipment – driver’s information
Overspeed alert option
Passenger’s seat position memorisation control unit option
Automatic gearbox option
Right-hand-drive vehicle
ESP option
Driving school vehiclde option
3-door vehicle
Engine oil temperature sensor option
Coolant level sensor option
Passenger airbag option
Presence of the telematic unit (RT3)
Presence of water-in-diesel-fuel sensor
Presence of the air pump
Multiplexed ABS option
Estate vehicle
Presence of a piloted manual gearbox
Origin of the water-in-diesel-fuel information
Driving position memorisation option
Presence and type of vehicle cruise control
Origin of the oil temperature information
Presence of the parking assistance button
Type of parking assistance
Presence of the log of functions
Presence of the log of alerts
Parking assistance with visual information
Parking assistance with sound information
Presence of a fixed centred controls (FCC) steering wheel
Presence of a programmable button
Type of detection of presence of fuel cap
Piloting of the diesel fuel additive pump
Type of alternator
Engine ECU compatible with the vehicle speed limiter
Presence of button for measurement of available space
Presence of warning lamp for measurement of available space
Type of seat belt fastening management contol unit
Total time before next service (threshold)
Threshold for first service
Maintenance threshold (marketing)
Kilometre threshold for forcing of customer mode
Memorisation of faults
Kilometre threshold for automatic change from park mode to customer mode
Type of personalisation menu
Presence of an electric secondary brake
Presence of a battery charge indicator
Control unit for memorisation of rear seat positions
Presence of the welcome function for the rear passengers
Electrically adjustable rear seats
Presence of the welcome function for the driver
Origin of the oil pressure information
Number of seat belt non-fastening switches
Sensor for detection of presence of a front passenger
Detection of non-fastening of the driver’s seatbelt
Detection of non-fastening of rear passengers’ seatbelts
Detection of non-fastening of the front passenger’s seat belt
Detection of non-fastening of the middle front passenger’s seat belt
Presence of a radio RD4
Presence of a red warning lamp for the Steering Assistance alert
Presence of an orange warning lamp for the Steering Assistance alert
Tolerance on value set for the cruise control / speed limiter
Lane Departure Warning System option
Format for exchanges of data with the switch module under the steering wheel
Presence of a fuel pump
Types of information managed by the seat belt fastening control unit
Retention of the brake when starting on an incline
Type of vehicle
Presence of a hands-free kit
Presence of a CD changer
Presence of a rear height corrector control unit
Detection of non-fastening of middle rear passenger’s seat belt
Detection of non-fastening of rear LH passenger’s seatbelt
Detection of non-fastening of rear RH passenger’s seatbelt
Presence of a steering angle sensor
Presence of a rev counter control unit or an odometer warning control unit
Presence of an audio equaliser amplifier
Detection of non-fastening of seat belts for the third row of seats
Sound alert for parking assistance emitted by the switch module under the steering wheel
Display of fuel consumption without overconsumption due to the regeneration of the particle filter
Time of response by the engine ECU to the BSI when operating the cruise control
Display of the alert for fastening of rear seat belts when opening a door or switching on the ignition
Retention of braking (by the ESP) for 2 seconds when starting on a gradient
Menu: air conditioning – cabin heating
Presence of an outside temperature sensor
Deactivation of load-shedding of the aircon blower
Presence of an aircon compressor with external control
Presence of a pollution sensor
Presence of an additional blower
Type of sunlight sensor
Type of air mixing
Type of air distribution
Type of additional heating
Aircon compressor drive ratio
Presence of piloted blower
Presence and type of blown air sensor
Type of air inlet
Position of the outside temperature sensor
Type of outside temperature sensor
Recovery of the heat from the exhaust gases for heating the passenger compartment
Recovery of the heat from the engine for heating the passenger compartment
Type of rear air blower
Type of climate
Type of aircon compressor
Presence of air conditioning
Menu: lighting – signalling – visibility – rear view mirrors
Sunlight sensor option
Rain sensor option
Rear screen wipe option
Headlamp wash option
Vehicle location option
Automatic lighting of the instrument panel and multifunction screen as a function of ambient brightness
Automatic lighting of hazard warning lamps in the event of impact
Timing of guide-me-home lighting option
Automatic lighting of hazard warning lamps under heavy deceleration
Dipped beam and main beam in the same lens
Presence of front foglamps
Daytime-running lamps
Multiplexed electric rear view mirrors with foldback
Rear view mirrors indexed to reverse gear
Presence of rear screen wipe in reverse gear
Lighting of hazard warning lamps when pressing the emergency call button
Presence of rear foglamps
Very cold option
Main beams and foglamps in the same lens
Black Panel mode option
Guide-me-home lighting option
Type of headlamps
Type of daytime-running lamps
Presence of a rain/sunlight sensor with regulated-speed screen wipe
Presence of directional headlamps that can be diagnosed
Presence of a lighting stalk with four positions
Presence of a stalk with one-touch activation of automatic wipe
Activation of automatic lighting of headlamps via the personalisation menu
Presence of a third button on the high frequency remote control for lighting of headlamps
Presence of a left hand reversing lamp
Presence of a right hand reversing lamp
Presence of parking lamps
Presence of rear left hand foglamp
Presence of rear right hand foglamp
Control of front foglamps via a dedicated output from the engine relay unit ( BSM)
Adjustment of the lighting rheostat in day mode
Type of interior lamp switch
Menu: locking – doors and tailgate – immobiliser – alarm
On-the-move locking option
Option for opening the boot via the high frequency remote control
Mercosur windows logic
Central closing by high frequency remote control
Type of locking
Two multiplexed front windows
Number / type of sun roof
Opening rear screen option
Child safety option
Option for closing of windows by high frequency remote control and by key
Type of child safety
Automatic relocking
Presence of central locking
Type of alarm
Type of anti-theft
Option for permanent locking of boot
Electric front windows with anti-pinch
Supplier of the high frequency remote control
Inviolability mode
Presence of a multiplexed sun roof
Alarm volumetric detection
Menu: fuel gauge low – oil level gauge low
Type of fuel
Oil level sensor option
Tank capacity
Resistance of gauge, tank empty.
Resistance of gauge, tank full
Fuel gauge law – alert level
Fuel gauge law – selection of the vehicle
Selection of engine oil gauging table
Origin of the oil level information
Condition for measuring the oil level
ECUs Also Fitted
Fixed centred controls (FCC) steering wheel
Airbag
Engine relay unit (BSM)
Rain / sunlight sensor
Driver’s door module
Passenger door module
BSI
Alarm
Parking assistance
Driving school module
Instrument panel
Radio
Lane Departure Warning System
NaviDrive telematic unit (RT3)
Display
Rev counter control unit
Trailer relay unit
Air conditioning
Driver’s seat memorisation control unit
CD changer
Hands-Free Kit
Diesel fuel additive module
Presence of steering angle sensor
Engine ECU
Automatic gearbox / piloted manual gearbox
ABS / ESP ECU
Deflation detection
Power steering
Directional headlamps
Multiplexed diesel fuel additive pump

Lexia 3 Diagbox 7.57 “Entry Point Not Found” error

Posted on by

Problem:

When tried to install lexia 3 cable with lexia/PP2000/Diagbox update version V7.57 software, I had “Entry Point Not Found error”. I changed another laptop, but still the same error.

“Le point d’entrée de procedure…

Introuvable dans la bibliotheque de liens dynamiques

XML TraceGenU-vc80.dll”

“The procedure entry point…

Not found in the library of dynamic links

XML TraceGenU-vc80.dll”

Error screenshot:

Solution:

Change another laptop running Windows XP mode, not VMware, follow the lexia-3 xs-evolution PP2000 diagbox 7.57 installation video instruction below strictly:

NOTE:

No anti-virus software programming before installation.

Diagbox 7.57 requires activation, please send the activation code to us to activate.

Ceci est du support technique du site Web OBD2 Outil de diagnostic:Lexia 3 Diagbox 7.57 “Entry Point Not Found” Erreur

Using exp. with Lexia 3 PP2000 Diagnostic Interface

Posted on by
A friend of mine got a Lexia 3 and PP2000 not the latest version. He made some problem when update the diagbox. Following part displays the problem and solution.
Problem:
After got Lexia 3 PP2000 diagnostic interface, it asked for an update. He tried to install the diagbox on a Wi-Fi enabled Toshiba laptop running Windows XP Professional operating system, of course with a tutorial video. He found that he had to uninstall the PP2000 files manually because the control panel “Remove program” uninstaller did not work.
He had no problem with installing the diagbox application and running 5.02 patch. But problem occurred when restarted the diagbox and activated it. He failed to try several times. As the same time an error message displayed “ERROR LEXIA. Error during installation of Lexia. You have to reactivate to restart the installation.”
ERROR LEXIA
He had to consult the tech support and offered the best solution.
Solution:
Step 1 Put all Diagbox files into a certain folder, e.g Local Disk C:/
Step 2 Download IMGBurn
Step 3 Run IMGburn and make new image of the ONE Diagbox folder
Step 4 Click and open new image, then virtual clone driver MOUNT
Then update the Diagbox again and it ran no problem with activation.
Ceci est du support technique du site Web DIYobd2.fr:Using exp. with Lexia 3 PP2000 Diagnostic Interface

Lexia 3 Diagbox v7.02 installation and activation error solution

Posted on by
One of the Lexia 3 v48 Peugeot Planet PP2000 v25 Diagbox v7.76 interface users came across lexia 3 Diagbox and turn to diyobd2.fr engineer for help. Following are the detail problem and solution provided.
Problem:
When installing and activating lexia 3 Diagbox software for PSA Peugeot and Citroen, the Lexia 3 interface program display an error message: (display picture below)
There was an AUTHENTIFICATION windows asked to enter the user name and password.
CONFIRMATION MESSAGE
Important: if you do not identify yourself. You will not be able to gain access to the operation requested…Do you wish to access this operation?
Possible reason:
From the software program, we can see that the Diagbox he installed is the 7.02 version. The Diagbox diagnostic software has not been completely installed.
Solution:
Re-install the Lexia-3 Diagbox software until the installation procedure is completed.
Better suggestion is to upgrade lexia 3 to the current Diagbox v7.76 version.
Here are some related user manuals provided to help to install

Citroen C3 climate and radiator fan error, what to do?

Posted on by

Lexia 3 found P0485 from 2004 Citroen C3 HDI:

Here I would like to share my experience troubleshoot climate and radiator fan issue. Hope it helps anyone.
I have 2004 C3 HDI, with smart fan 1253h3, has ABS with no esp and automatic climate. When I switch climate on or heat bar 3 dash warms and beeps 3 times and all the heat lights come on. I noticed that if engine warning light on everything is ok when engine warning light turn off on the dashboard fan not cuts in and the problem comes back. I changed engine heat sensor, thermostat, controlled all wiring (can bus wiring, fan power cables), changed relay.

But nothing solved the problem. Then I went to C3 forum for help, and a member told me to use Lexia 3 to pull up any error codes before changing parts and it can help guide to the point of the problem.

I bought a Lexia 3 scanner from a Chinese shop he recommended, hooked it up my C3 this morning and got a P0485 code. Below is a screenshot of Lexia 3 software (Diagbox 7.76) with the code.
On slow speed actuator it says faulty actuator. But sometimes fan cuts in. An interesting alternative description for P0485 is Cooling Fan Power/Ground Circuit Malfunction. It might be a fan or an ECU, I am not sure from a P code. But it is easier to try a new fan than try a new ECU. So I replaced the fan, and the clear the climate control problem is fixed.
Ceci est du support technique du site Web DIYobd2.fr:Lexia 3 found P0485 from 2004 Citroen C3 HDI