Tag Archives: bmw enet cable

How to generate FCS codes on 2012 BMW F30 with CIC

Posted on by

Last week, i happened to get FSC generator for navigation systems and managed to use this one on my 2012 F30 with CIC.

Free download:

FSC Generator

Password: “Eintracht_Frankfurt”

It generates the FSC in three steps (READ FSC – DECODE FSC – GENERATE FSC). But you have to change the “year-parameter” in the batch-file to a later map (e.g. 2016 – or even later – instead of 2014), then it works perfectly.

The Default 0x06 for 2014 does not work, but 0x09 does!

In addition, you’ll need an BMW ENET cable and a working EDIABAS installation (32-bit – It does not run on 64-bit Windows!):

Basic Steps:

1. Read the navi FSC using the swid_reader.

2. Disconnect your latptop from the car (it’s no longer needed).

3. Decode the FSC code using the supplied b64dec tool.

4. Feed the decoded fsc code to fsc.exe along with the region (0x2d) and map sequence code (0x08 for NA Premium 2014-2).

5. This will output the “short” FSC code for your car.

6. Plug the USB stick with the maps into the glovebox USB port with the ignition on.

7. The car will say that an updated map is available. Click OK and it will prompt you to enter the short FSC via iDirve.

8. Enter the code output by the FSC generator and if everything is good, it will start loading.

The FSC code from BMW is very expensive. But now i think i can save a buck.

Ceci est BMW ICOM Série du support technique du site Web www.diyobd2.fr:Comment générer des codes FCS sur 2012 BMW F30 avec CIC

Change F-series Werte values with BMW E-sys ENET cable

Posted on by
BMW E-sys is the best coding software for F-series. Here is the step-by-step instruction of changing BMW F10 Werte values with ENET E-sys cable.
Tool needed:
BMW ENET Cable (cheap $11 in diyobd2 website)
E-SYS software version 3.23.4
PSdZ Data V50.3 (extracting passwords: E*G@rqVa, PIN 2670)
A laptop running Win XP home
Instructions:
1.Connect the ENET (Ethernet to OBD) cable with vehicle via OBD socket
2.Wait until LAN network adapter in task bar has established limited network capacity
3.Open ZGW-SEARCH.exe
4.Open E-sys software
5.Click the connection icon
6.Select your F series model, selection Connection via VIN and click continue
7.Follow system prompt. Click “Read(VCM)”
8.Select CADF with a green check mark file under the module you want to read, select “Coding Read Data”
9.Close error report windows pops up
10.New option under CADF, a folder. Expand the folder and right click the file, select “EDIT FDL”
11.Browse the folder, you will find your option, for example KOMFORTSCHLIESSUNG-FB
12.Factory option set to nicht-active. Right click, select “Edit”
13.Then click werte value, click “Edit”
14.The option to change the value in the lower window. Change current value with new, click the button on the right
15.Change werte value==00 to werte value==FF, save settings
16.Open same file under “File Name”. It shows file name and location
17.The E-SYS software display new value name and werte value
18.Save settings
19.Right click FA, select “Activate FA”
20.Select CAFD file you just edited and select “CODE DFL”
21.When DFL coding completed. Close the error report windows.
22.Werte value changing procedure now is completed.
23.Exit the BMW E-sys software and disconnect the ENET interface from vehicle.

Ceci est du support technique du site Web OBD2 Outil de diagnostic:Change F-series Werte values with BMW E-sys ENET cable